MB Series Flip Level Gauge (-190~+425°C/Strong and weak corrosion,
inflammable and explosive, toxic, strong radioactivi
MB series magnetic flip level meter adopts the connector principle to connect the container through
the gas phase and liquid phase link flange. According to the
buoyancy and magnetic coupling of the original
Furthermore, the magnetic float in the measuring cylinder (i. e.,
the connector) drives the increase (decrease) on the external
display of the measuring cylinder
change. When the liquid level rises, the magnetic float drives the
roll for 180°, showing red or green; when the liquid level drops,
the magnetic float drives the roll
Reverse rotation for 180°, showing white. The height of the red
band (or green band) is the height of the tested liquid level,
which realizes the measurement and display of the tested liquid
The pose of the (bound) surface position.
Each flip plate is a two-color axial symmetric structure with 10mm
spacing between the two flip plates in white and red (green),
respectively
Part and liquid phase part, red (or green) and white junction is
the liquid phase and gas phase boundary. The level gauge can
measure both the level and level
Interface of two media with different density.
Product characteristics:
1. Simple structure, strong and reliable, durable, almost no
maintenance workload, can be installed and used outdoors for a long
time;
2. The measured medium is completely isolated from the display part
of the liquid level meter, the liquid level sensor and the magnetic
switch;
3. Wide working pressure range, withstand pressure from vacuum to
42MPa;
4. Wide working temperature range, applicable to the range
from-190~ + 425 C:
5. Not affected by the physical and chemical state of the measured
medium. Such as: the conductivity of the medium, dielectric
constant, foam, pressure, temperature, evaporation, boiling,
bubbles and other effects. Widely used in all kinds of strong and
weak corrosion, flammable and explosive, toxic, strong radioactive,
stirring, dirty liquid surface and interface measurement;
6. Optional single cut single throw (SPST), single cut double throw
(SPDT) passive bistable magnetic switch to realize high and low
liquid level, interface control or report.
The number of magnetic switches is not limited.
7. Optional dry clarinet liquid level sensor or capacitive
second-line liquid level sensor, magnetic strictive liquid level
transmitter, output 4 ~ 20 m ADC (or with HART protocol) signal, to
achieve long-distance centralized measurement and control.
8. Line liquid level sensor can be equipped with LED digital
display for night observation.
